The 1056 dual-input transmitter offers single or dual sensor input with an unrestricted choice of dual measurements thus reducing the cost per loop and saving panel space. This multi-parameter instrument offers a wide range of measurement choices, including differential conductivity,
Manual Butterfly Valve – Gear Operated Replaceable Muffler Butterfly Valve
Model TECO Size Range 2″ to 12″ Seals PTFE Sleeve PTFE Leakage Tight Shut-Off Temprature Upto 180°C Pressure Upto 7 Kg/Cm² Media Powder Application Ends Wafer Type
Pneumatic Actuators
Pneumatic Rotary Actuator Double Acting As Per ISO 5211 METHOD OF TRANSMISSION RACK AND PINION TYPE ACTUATION DOUBLE ACTING BODY EXTRUDED ALUMINIUM HARD ANODIZED CAPS AND RACK ALUMINIUM PRESSURE DIE CAST PINION EN 8 SEALS BUNA – N / Viton
Solenoid Valve – 2/2 Way Semi Lift Diaphragm Valve
Model KPL Body CF8 / CF8M / CF3M Size 1/2″ to 1″ Seals NBR / Viton / EPDM Temperature 85°C Pressure 0.5 to 5 BAR Coil Insulation “F” Class Ends Screwed / Flanged
Pneumatic Diaphragm Actuator Rubber Lined Diaphragm Valve
Actuator Details: Body M.S. Pressed Actuator Type Diaphragm Single Acting Actuator Action Direct / Reverse Acting, Normally Open / Normally Close Operating Pressure 1.4 to 4.5 BAR Valve Details: Size Range 1/2″ to 8″ Body Cast Iron /
Pneumatic Aluminum Butterfly Valve for Cement
Model CMT Size 4″ to 16″ Seals NBR Temperature Up to 85°C Pressure Up to 4 to 6 Kg/Cm² Media Cement
Pneumatic Ball Valve
Model HBA Body CF8M Size 1/2″ & 1″ Ball CF8M Seals CFT Leakage Class VI Temperature Up to 180°C Pressure Up to 200 Kg/Cm² Media Air, Water, Oil & Gas Ends Screwed
Fisher™ Vee-Ball™ V150S Flanged Control Valve
The Fisher Vee-Ball V150 control valve is your best choice for performance and cost-effectiveness across a broad range of applications. The precision-machined parts and pressure-balanced seal designs allow smooth, precise valve operation. Valve End Connection Styles Flanged valves that mate
Baumann™ 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves
The Baumann 24000 control valve is intended for general utility service in pressure, flow, and temperature control applications. This control valve exhibits low hysteresis and deadband, good control characteristics, tight shutoff, rugged construction, high performance packing, and easy maintainability. These
Fisher™ GX Control Valve And Actuator System
The Fisher GX valve and actuator system can meet a wide range of flow and pipeline sizing requirements. A three-way construction is available, which is suited for accurate temperature control. The engineered passages within the valve body provide optimal capacity